Kenwood DVT-6200 - Manual (Page 40)

40
DVT-6200 (EN/K,E,X)
Operations
Various playback functions
Basic play
Preparation
Load a disc.
1
Start playback.
2
CHAPTER No. (DVD)
TITLE No. (DVD)
TRACK No. (CD/VCD)
Time display
To pause playback
÷ Each press the PLAY/PAUSE
key on the main unit, pauses
and plays the disc alternately.
RESUME playback (only DVD)
When the 7 (Stop) key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where the
playback had been stopped. This is called the RE-
SUME function. When the
7 (Stop) key is pressed
again during stop, the RESUME function is cancelled.
Playback of disc
MAIN UNIT
MAIN UNIT REMOTE
MAIN UNIT REMOTE
1
Open the tray.
2
Place a disc.
÷ When the 6 key, 3 key or open/close (0) key is pressed
while a tray is open, the tray closes automatically, and then
playback begins.
Label side
3 (PLAY) key
7 (Stop) key
TOP MENU key
POWER ON/ OFF switch 7 STOP key
0 OPEN/CLOSE key
6 PLAY/PAUSE key
Disc tray
Note Note Note
or
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the
screen. Then press ENTER to select specific menu you
want to play by using Cursor keys.
To stop playback
MAIN UNIT REMOTE
7
When a menu screen is recorded on the DVD disc,
the menu screen will be displayed when the TOP
MENU key or MENU key is pressed. At the menu
screen, the menu can be selected by pressing the
Cursor keys.
INTRO
SCAN
or
÷ Press the 8 (pause) key on
the remote.
Turn on the POWER.
03.7.8, 11:15 AM Page 40