Kenwood DVT-6200 - Manual (Page 21)

DVT-6200 (EN/K,E,X)
Set Up functions
21
Preparations
3 Press Cursor up/down (5/∞) keys on the remote
to select ANGLE MARK, then press the Cursor
right (
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4 Press Cursor up/down (5/∞) keys on the remote
to select ON or OFF, then press the ENTER key.
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select ANGLE mark ON or OFF
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
Please refer to pages 18 and 19 for setup.
3 Press Cursor up/down (5/∞) keys on the remote
to select OSD LANG, then press the Cursor right
(
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4 Press Cursor up/down (5/∞) keys on the remote
to select specific language, then press the EN-
TER key.
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
Select OSD Language
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
03.7.8, 11:06 AM Page 21