Kenwood DVT-6200 - Manual (Page 36)

36
DVT-6200 (EN/K,E,X)
Operations
Receiving broadcast station
It is also possible to receive them by one-touch operations
by storing up to 40 stations in the preset memory. (see page
37)
When the BAND key is pressed, this unit will be
switched on automatically.
Select the TUNER input
1
REMOTE MAIN UNIT
Select the broadcast band
2
Each press changes the band.
1 FM
2 AM
REMOTE MAIN UNIT
Select a tuning mode
3
Each press switches the mode
1 “AUTO” : auto mode
2 “MONO” : monaural mode
Select a station
4
P.CALL (preset call) “AUTO” mode
(auto tuning) “MONO” mode
(manual tuning)
REMOTE MAIN UNIT REMOTE
Each time a key is pressed, the frequency
is changed by one step.
When a key is pressed continuously, the
frequency changes continuously.
Use the manual tuning mode when re-
ception is noisy due to weak reception.
(In the manual mode, stereo broadcasts
are received in monaural.)
Press the TUNING keys to receive the
next tuned station automatically Press the 4 , ¢ keys to select a
preset station.
REMOTE
Band display
Preset number
Tuning indication
Stereo tuning indication
Frequency display
REMOTE
TUNER/BANDkey
VOLUME keys
4,¢ keys
SKIP ( 4,¢) keys
BAND key
AUTO/
MONO key
1,¡keys
When the TUNING keys are pressed in AUTO mode, a station
will be tuned in automatically and tuning will stop. Stereo recep-
tion will be made automatically when a stereo broadcast with
sufficient signal strength is received.
03.7.8, 11:07 AM Page 36