Category and channel search – Kenwood DPX701 DPX501 User Manual
Page 5
English
|
5
Notes
• No USB device comes with this unit. You need to
purchase a commercially available USB device. For
the types of available USB devices, refer to
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• We recommend the use of Code> (page 37) to prevent theft. • The characters conforming to ISO 8859-1 character set can be displayed. (DPX701 only) • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; • The RDS feature won’t work where the service is not supported by any broadcasting station. • There are places in this manual where lit indicators are described; however, the only time • The illustrations of the display and the panel appearing in this manual are examples used to How to reset your unit • If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when • Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB • Press the Reset button if the disc auto changer fails to operate correctly. Normal operation should Before using this unit for the first time This unit is initially set on the Demonstration mode. About SIRIUS Satellite radio tuner Refer to the instruction manual of SIRIUS Satellite (DPX701 : without Reset button DISP AUTO 1 - 6 4 FM/SCRL AM 38 ¢ SRC In SIRIUS tuner source Category and Channel Search Selecting the channel and category you want to 1 Enter Category and Channel Search mode Press the Control knob. 2 Select the Category Push the Control knob towards [FM] or [AM]. • It is the item when the category of Middle text display part is selected. 3 Select the Channel Push the Control knob towards [ 4] or [ ¢]. • You cannot Channel search until the category Cancelling Category and Channel Search Press the Control knob.
^ - { } | ~ . (DPX501 only)
an indicator will light is in the following settings.
When Indicator is selected as mentioned in
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
the Reset button is pressed.
device installed can damage the data contained
in the USB device. For how to remove the USB
device, refer to
be restored.
When using this unit for the first time, cancel the
radio tuner KTC-SR901/SR902/SR903 (optional
accessory) when connected, for the operation
method.
• Refer to the sections of A models for operations.
receive.
information is acquired.
mode