Konica Minolta bizhub 180 - Manual (Page 85)

4 4.3 Copying Onto Various Types of Media
4-8 bizhub 180
Us
efu
l O
pe
ratio
ns
Ch
apte
r 4
To copy onto label sheets
As an example, the following procedure describes how to make copies onto 7-7/8
inch (200 mm)
×
9-13/16 inch (250 mm) label sheets loaded into the 1st tray.
✎
Tip
When using the 10-Key Pad to enter a custom paper size, the values are
entered in millimeters. The conversion ratio is shown below.
1 inch = 25.4 mm
1 Position the document(s) to be copied.
❍ Refer to “ Loading the Document ” on page 3-9 .
2 Adjust the paper guides in the 1st tray,
and load the label sheets.
❍ Load label sheets so that the
surface to be printed on faces
upward, as shown in the
illustration.
3 Press the [Utility] key twice.
The “PAPER SOURCE SETUP”
menu appears.