Konica Minolta bizhub 180 - Manual (Page 48)

2.6 Names of Control Panel Parts and Their Functions 2
bizhub 180 2-19
Pr
ec
au
tio
n
s
Ch
apte
r 2
No. Part Name Function
21 [Scan] key Press to enter Scan mode. The indicator lights up in green to
indicate that the machine is in Scan mode.
(Available only when the Network interface card NC-502, Fax kit
FK-505 and the Scanner unit SU-502 are installed.)
22 [Fax] key Does not function on this machine.
23 [Copy] key Press to enter Copy mode. The indicator lights up in green to
indicate that the machine is in Copy mode.
24 [Access] key Used with user management. (p. 6-24)
25 [Energy Saver] key Press to enter Energy Save mode. (p. 2-23)
26 [Interrupt] key Press to enter Interrupt mode. The indicator lights up in green
to indicate that the machine is in Interrupt mode.
Press again to cancel Interrupt mode and return to the mode
before Interrupt mode was entered. (p. 5-38)
27 [123/ABC] key Does not function on this machine.
28 [Panel Reset] key • Cancels all copy functions and returns them to their default
settings.
• Deletes all queued jobs.
29 [Stop] key Stops the multi-page copy operation.
30 [Start] key • Starts copying.
• Queues a copy job if pressed while the machine is warming
up. (p. 2-24)
• The indicator lights up in green to indicate that the machine
is ready to start copying, or it lights up in orange to indicate
that the machine is not ready to start copying.
31 10-Key Pad • Used to specify the number of copies.
• Used to enter setting values.
• The [
] and [#] keys do not function on this machine.
21 22 23
24
25
26
27
28 29 30 31