Konica Minolta bizhub 180 - Manual (Page 51)

2 2.7 Power Supply
2-22 bizhub 180
Pr
ec
au
tio
n
s
Ch
apte
r 2
2.7 Power Supply
To turn on the machine
Set the Power switch to “I”.
The indicator on the [Start] key lights up in
orange, and the message “
∗ PLEASE
WAIT!
∗
” appears in the display.
✎
Note
The machine finishes warming up
within 30 seconds (at normal room
temperature (73.4
° F)).
A copy job can be queued while the
machine is warming up.
To turn off the machine
1 Check that all jobs are finished.
2 Set the Power switch to “ 2 ”.
Default Settings
The settings that are automatically
selected when the machine is turned off
or the [Panel Reset] key is pressed are
called the “default settings”. These settings serve as a reference for all functions.
Copy mode
● Number of copies: 1
● Copy density: AUTO
● Zoom ratio: Full size ( × 1.00)
● Paper source: AUTO (with the Document feeder installed)
● Finishing function: Non-sort
✎
Tip
The default settings can be customized using the functions in the Utility mode
(
“ 7 Utility Mode – Copy Functions ” ).