Konica Minolta bizhub 180 - Manual (Page 79)

4 4.1 Specifying a Zoom setting
4-2 bizhub 180
Us
efu
l O
pe
ratio
ns
Ch
apte
r 4
4.1 Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size
As an example, the following procedure describes how to enlarge a Ledger-size
document to a 11
× 17-size document.
1 Position the document(s) to be copied.
❍ Refer to “ Loading the Document ” on page 3-9 .
2 Press the [Zoom] key.
“LG
→
11
×
17” appears in the display.
✎
Note
With each press of the [Zoom] key,
the preset zoom ratio that is
displayed changes one setting at a
time.
3 Check the setting for the size of paper
to be printed on.
❍ If “AUTO” is displayed, check that
11
× 17-sized paper is loaded into
the paper tray.
❍ If “AUTO” is not displayed, press
the [Paper] key until “AUTO” is displayed.
❍ For details on changing the paper size setting for the paper tray, refer to
“
Setting Up the Paper Sources ( “ PAPER SOURCE SETUP ” Menu) ” on
page 7-16 .