beautypg.com

Chapter three: setting up on the receiver, Re v eiv er setup – Kenwood KRF-V9993D User Manual

Page 49

background image

R

e

v

eiv
er Setup

Chapter Three: Setting Up on the Receiver

43

Chapter Three: Setting Up on the Receiver

It is possible to set up the speakers and register the input
devices on the receiver main unit.

However, some of the setting items such as the controlled
device registration should also be set on the PowerTouch.
If setup is made on the PowerTouch, it is not necessary to
repeat any setup on the receiver side.

Therefore, it is recommended to perform setup on the
PowerTouch. This chapter describes the setup on the receiver
only as an alternative method in case the setup is not made
on the PowerTouch.

Do not operate the PowerTouch during the receiver setup.

Preparation for setup
Most of the receiver control keys are accommodated inside
the panel door. Make the following preparation for setup
on the receiver.

1. Plug the power cord into a household power outlet.

2. (VR-4900, VF-4700)

Press the REMOTE POWER key to turn the receiver ON.

(KRF-V9993D)
Press the POWER switch to supply the main power. The
receiver now enters the STANDBY mode (in which re-
mote control is available). Then press the ON/STANDBY
key to turn the receiver ON.

3. Open the panel door.

Panel door

Speaker setup
1. Selecting the speakers

Selecting the SUBWOOFER:

1 Press the SET UP key inside the panel door to dis-

play “SUBWOOFER OFF (or ON)”.

2 Press the MULTI CONTROL (

fi/%) key to select ON

(when a subwoofer is used) or OFF (when not).

Selecting the FRONT speakers:

3 Press the SET UP key to display “FRONT LARGE (or

NORMAL)”.

4 Press the MULTI CONTROL (

fi/%) key to select

FRONT LARGE (large-sized speakers) or NORMAL
(normal-sized speakers).

If the SUBWOOFER is set to OFF, the FRONT speak-
ers are set automatically to LARGE and the CENTER
speaker selection display appears automatically.

Selecting the CENTER speaker:

5 Press the SET UP key to display “CENTER LARGE

(or NORMAL or OFF)”.

6 Press the MULTI CONTROL (

fi/%) key to select

CENTER LARGE (large-sized speaker), NORMAL
(normal-sized speaker) or OFF (no center speaker).

If the FRONT is set to NORMAL, the CENTER speaker
can be set to only either NORMAL or OFF.

Selecting the SURROUND speakers:

7 Press the SET UP key to display “SURROUND

LARGE (or NORMAL or OFF)”.

8 Press the MULTI CONTROL (

fi/%) key to select

SURROUND LARGE (large-sized speakers), NOR-
MAL
(normal-sized speakers) or OFF (no surround
speaker).

When the FRONT is set to NORMAL, the SUR-
ROUND
speakers can be set to only either NORMAL
or OFF.

Selecting SW RE-MIX:

9 Press the SET UP key to display “SW-REMIX OFF

(or ON)”. If the SUBWOOFER is set to OFF, select-
ing SW RE-MIX step will be skipped.

0 Press the MULTI CONTROL (

fi/%) key to select ON

or OFF.

- Press the SET UP key to proceed to “Selecting the

speaker volumes” below. To exit from setting, press
the SET UP key repeatedly until “SETUP FIXED” is
displayed.

For details on the SW RE-MIX and the selection of
speakers, please see page 36.

Panel door

Press the DOOR OPEN/
CLOSE key to open the
panel door. To close it, press
the key again.

Press the lower part
of the panel door.

VR-4900/KRF-V9993D

VR-4700

A SPEAKERS B

I NPUT
MODE

CD 2/TAPE 2

MONITOR

LISTEN

MODE

SET UP

SOUND

MULTI

CONTROL

fi

%

P.CALL

MEMORY

AUTO

BAND

fi

%

Key layout