Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 49)

HD-5MD/EN
49
Application
MD Edit Functions
TRACK EDIT
4 ¢
P.CALL
SET
4 ¢ P.CALL
SET
4 ¢
P.CALL
SET
ENTER
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
Deleting group information
Information in regard to group registration can be
deleted.
The information and the group name for the se-
lected group or all groups of the MD can be erased.
Remote control unit only
Select MD and obtain stopped condition.
÷ When the editing is to be abandoned, press
the "TRACK EDIT" key to stop the editing and
to return to the original condition.
÷ When an item which cannot be edited is se-
lected, an will be shown at the beginning
of the display.
÷ MD edit mode is reached. 1 Press the "TRACK EDIT" key.
2 Press the 4P.CALL¢ keys re-
peatedly to select "EDIT GROUP"
and press the "SET" key.
3 Press the 4P.CALL¢ keys re-
peatedly to select "GROUP CAN-
CEL" and press the "SET" key.
4 Press the 4 P.CALL ¢ keys
to select the group to be de-
leted and press the "SET" key.
6 Press the "ENTER" key.
7 After editing has been com-
pleted, press the
0 key to eject
the minidisc.
Return to the original status is made when no opera-
tion is performed within 20 seconds.
"ALL GROUP" :
All groups on the MD will be deleted.
"Track No. ___ Track No." :
The information for the selected group will be
deleted.
The editing may be aborted when the MD is removed or
the power is switched off while "EDIT NOW" is being dis-
played.
÷ Remove the minidisc after the editing information has been
written to the minidisc with display of "MD WRITING".
While "MD WRITING" is displayed, information
is being written to the minidisc, and the unit
should not be subjected to vibrations or shocks.