Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 45)

HD-5MD/EN
45
Application
Only the first track of the set CDs will be recorded.
As it is possible to exchange the CDs in the other trays while one CD is being recorded, this can be used
conveniently to continue recording the hits of single CDs.
Recording only the first track of selected CDs (BEST HITS program
recording)
Remote control unit only
1 Select the desired recording
speed. w
2 Set a recordable minidisc.
¤
3 Set a disc into the CD tray.)
4 Enter CD stop status. )
5 Press the "BEST HITS" key.
6 Press the "O.T.E." key to start
recording.
BEST HITS
Stop the BEST HITS program playback.
7
STOP
AUTO/MONO
Cancel the BEST HITS program playback.
BEST HITS
O.T.E.
÷ Recording will be done with the recording mode
and the recording speed set in advance.
Perform the operation of step 3 on page 33 to
change the recording speed.
÷ Recording of only the first track of the CDs will
start.
÷ The first track of the selected disc will be re-
corded, and then the unit will switch to the first
track of the next disc. (BEST HITS program re-
cording)
÷ When this unit changes the CD automatically ac-
cording to the BEST HITS program, the recording
also is paused automatically and no unnecessary
recording (parts without sound) is made.
÷ When the BEST HITS program playback or the
MD recording stops, the other operation also
stops automatically.
÷ When the possible recording time or the possible
number of tracks on the MD is exceeded, "DISC
FULL" will be displayed and the recording will
stop.
÷ BEST HiTS program recording in combination with
repeat playback is not possible.
When discs are replaced sequentially, record-
ing in sequential order can be continued with-
out interruptions.