Kenwood NEXEDGE NX-200 User Manual
Page 59

50
3 The transceiver will announce the time and channel,
then the recording will automatically play back.
• When the entire recording has been played, “END OF
MESSAGE” is displayed. You can also end the recording
at any time by pressing the
key.
• To delete the selected recording, press the
key. To
clear all the recorded data, press and hold the
key.
v
oice
g
uide
If set up by your dealer, when changing the zone and/or
channel, an audio voice will announce the new zone and
channel number/group ID. Additionally, when changing a
function setting, an audio voice will announce the new setting.
(Voice announcements vary by dealer setting.)
This manual is related to the following products: