Kenwood NEXEDGE NX-200 - Manual (Page 39)

30
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by Kenwood Corporation. FleetSync enables
a variety of paging functions on your transceiver, some of
which depend on dealer programming.
Your dealer can set up either FleetSync or FleetSync II on
your transceiver. Transceivers set up with FleetSync can
communicate with other transceivers that have been set up
with FleetSync. Likewise, transceivers set up with FleetSync II
can communicate with other transceivers set up with FleetSync
II. However, transceivers set up with FleetSync cannot
communicate with transceivers that have been set up with
FleetSync II and viceversa.
Note: This function is available only in analog operation.
S
elcAll
(S
elective
c
Alling
)
A Selcall is a voice call to a particular station or to a group of
stations.
■
Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press the / keys to select the ID of the station
you want to call.
• On keypad models, if Manual Dialing is enabled, you can
enter the station ID by using the DTMF keypad.
4 Press the PTT switch and begin your conversation.
■
Receiving
An alert tone will sound and the transceiver will
automatically enter Selcall Mode.
The calling station’s ID will appear when a Selcall is
received. When the call station’s ID appears on the display,
you can respond to the call by pressing the PTT switch and
speaking into the microphone.
FleetSync:
ALPHANUMERIC 2-WAY PAGING FUNCTION