Kenwood NEXEDGE NX-200 - Manual (Page 27)

8
BASIC OPERATIONS
S
witching
p
ower
on/oFF
Turn the Power switch/ Volume control clockwise to switch the
transceiver ON.
Turn the
Power switch/ Volume control counterclockwise to
switch the transceiver OFF.
■
Transceiver Password
If the transceiver is password protected, “PASSWORD” will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the correct password:
1 Select a character using the
and keys.
• On keypad models, you can enter the password by direclty
pressing the DTMF keys instead.
2 Press the key to enter the selected character.
• This step is unnecessary when using the keypad.
3 Repeat steps and 2 to enter the entire password.
• Press the key or # key to delete an incorrectly entered
character. Press and hold the key or # key to delete all
characters.
4 Press the key or key to confirm the entry.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
• The password can contain a maximum of 6 digits.