Kenwood XXV-05V - Manual (Page 83)

Position Fine Control
You can fine-adjust your listening position.
Position Fine Control screen
1 Adjusts the volume.
2 Selects a speaker to be adjusted.
3 Indication of setup distance.
The adjusted distance (Position and Position Fine
Control values), and the total of the distance
adjusted by Car Type Set Up (see page 50) and
the adjustment distance for position setup are
indicated.
4 Adjust the distance to each speaker.
5 Stores the present adjustment setup in memory,
or calls it from memory.
6 Exits the Position Fine Control setup and returns
to the Position screen.
1 Center speaker
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
Select a speaker you wish to adjust 2
Adjust
Display the Position Fine Control screen 1
To store your adjustment in memory:
—
Continue to touch to more than 2
seconds.
To call your adjustment from memory:
—
Touch to of your adjustment you
wish to call from memory.
• You can also call your adjustment setup in
memory using to buttons on the
Position screen (see page 82).
• Only the adjusted distance of position setup
(Position and Position Fine Control values) is
stored in memory. Therefore, the final
adjustment distance changes if you change the
Car Type Set Up value (see page 50).
Return
Close the Position Fine Control Screen 4
P3 P1
P3 P1
P3 P1
P3 P1
P3 P1
Store or call your adjustment into/from
memory
Set a delay time 3
English 83
Return
100 cm
100 cm
P1 P2 P3
1
1
1
1
3
2
4
5
6
1
3 2
4 5
6