Kenwood XXV-05V - Manual (Page 55)

Crossover Network Setup
You can manually set a crossover frequency of
speakers.
(P51 w)
1 Sets a crossover frequency.
2 Sets a crossover slope.
3 Returns to the Speaker Set Up screen.
4 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
The phase is reversed 180 degrees when set to
"Reverse".
• When you select a speaker type from the
Speaker Setup screen, the crossover
frequency setup is erased.
• During crossover setup, the speaker type is set
to "USER" on the Speaker Set Up screen.
X'Over
Speaker Setup Memory
You can store all of speaker and crossover
setup in memory simultaneously.
To store your setup in memory
(P51 q)
Continue to touch more than 2 seconds.
To call your setup from memory
(P51 q) Preset
Preset
English 55
Normal Phase
Return
Frequency y
18dB/Oct
Slope
100Hz 1kHz
LPF
1 1
2 2
3
4