Kenwood XXV-05V - Manual (Page 51)

English 51
Displaying the Speaker Set Up
screen
When the speaker type and size are set, the speaker
crossover network and equalizer curve are set
automatically.
Speaker Set Up screen
Displaying the Channel Level
screen
You can set the volume at each setup position.
Channel Level screen
9 Selects a speaker to be set.
(see , page 52)
p Selects a speaker type.
(see , page 52)
q Stores your setup in memory.
(see , page 55)
w Displays the Speaker Crossover Setup screen.
(See , page 55)
You can adjust the crossover setup that was set
automatically when you selected the speaker type.
e Set the use or no use of tweeter.
(see , page 52)
r Displays the Channel Level Setup screen.
t Displays the Car Type Set Up screen.
y Selects a speaker to be set.
(see , page 53)
u Sets the speaker volume.
(see , page 53)
i Starts or stops test signal tone output for setup
check.
o Displays the Speaker Set Up screen.
Your setup on the is
adjusted automatically to get the best sound
effects according to the car type and speaker you
have set on the (see page 50). We
recommend you to complete the
first, then set up the .
You can fine-tune the automatic set value by Setup> (see page 54),
(see page 55), or (see page
81).
Use
9
11
10 10
12
13
14 15
+10 dB +1
16
19
17 17
18