Kenwood XXV-05V - Manual (Page 54)

Setup Menu
DTA Setup
Manually set the sound output timing of each
channel.
(P50 6)
DTA Setup screen
1 Selects a speaker to be adjusted.
2 Sets a delay time of the selected speaker.
3 Stores the adjusted status in memory or calls it
from memory.
4 Returns to the Car Type Set Up screen.
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
Select a speaker you wish to adjust 2
DTA
Display the DTA Setup screen 1
The speakers are virtually moved to the desired
distance.
When the values of center speaker and front
speakers increase, they are virtually moved forward.
When the values of rear speakers and subwoofer
increase, they are virtually moved backward.
To store your setup in memory
Continue to touch more than 2 seconds.
To call your setup from memory
You can also call the setup from memory by touching
7 on the Car Type Set Up screen. Preset
Preset
Preset
Store or call your setup into/from memory
Set a delay time 3
54 English
2
3
2
3
4
1
Return
Preset
ront FFFFro Fro Fro ron
10cm 110c 10c
DTA DTA DTA DTA D
2 2
3
4
1