beautypg.com

Error messages, Specifications, Er.1 – KORG ES-1 User Manual

Page 59: Er.2, Er.3, Er.4, Er.7, Er.8, Er.9, Full

background image

59

8. Appendices

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

8. Appendices

Error messages

Error messages will be cancelled when you press the Stop/Can-
cel key.

Er.1

Writing could not be performed.

Er.2

When writing a song to a song of a different
number, you exceeded the maximum number
of events that can be recorded. Delete unneeded
song event data.

Er.3

There is insufficient space in internal memory
or on SmartMedia. You must first delete un
needed samples or files to create vacant space,
and then execute the Write or Save operation. 4
MB or more vacant space is required in order
to save ES-1 data on SmartMedia.

Er.4

The file could not be loaded (or played) from
the SmartMedia. Either the file format is wrong,
or the data has been damaged. Files that can be
loaded are ES-1 files, WAVE files (8 bit or 16
bit, monaural/stereo), and AIFF files (8 bit or
16 bit, monaural/stereo).

Er.7

An error occurred while loading a file from
SmartMedia or saving to SmartMedia.

Er.8

The SmartMedia does not contain any file that
the ES-1 can recognize.

Er.9

Protect is turned “

on

” for the memory of the

data you are attempting to write. In Global
mode, turn memory protect “

oFF

” (p.56).

A write protect label is affixed to the Smart
Media. Remove the write protect label from the
SmartMedia.

Full

During song event recording, the event data
memory has filled up. Delete unneeded song
event to free up memory (p.51).

Specifications

System

:

Sampling

Number of parts

:

12 parts

Sample parts

×

9

Slice sample part
Audio in part
Accent part

Sample capacity

:

150 (100 monaural, 50 stereo)
Maximum total of 95 seconds (monaural)

Memory capacity

: 128 patterns, 16 songs

Master effects

:

Delay

Normal, Motion Sequence, BPM Sync

Insert effects

:

11 types

Reverb, Flanger/Chorus, Phaser,
Ring Modulator, Pitch Shifter,
Compressor, Distortion, Decimator,
Isolator, Resonance Filter, Wah

Sequencer

:

Pattern

Maximum 64 steps per part,
Motion Sequence,
1 parameter per part, 64 events

Song

Maximum 256 steps per song,
Maximum 35,700 events of event
recording

Connectors

:

PHONES

Phone jack: stereo
Nominal level: 21 mW + 21 mW (32 ohm)

OUTPUT (L/MONO, R)

Phone jack: monaural x 2
Nominal output level: –10 dBu
Output impedance: 1 k-ohm

AUDIO IN (phone jack: mono/stereo)

Nominal input level: –10 dBu(LINE)

–40 dBu(MIC)

Input impedance: 47 k-ohm

MIDI (IN, OUT, THRU)

SmartMedia

TM

: 4—64 MB, 3V (3.3V)

Power supply

:

DC9V (included AC adapter)

Power consumption

:

6 W

Dimensions

:

300 (W) x 224.9 (D) x 55.4 (H)
(including rubber feet)

Weight

:

1.28 kg

* Specifications and appearance are subject to change without

notice for improvement.

* SmartMedia

TM

is a registered trademark of Toshiba Corpora-

tion.