Kodak DC200 - Manual (Page 42)

4-12
Language
The Language screen is used to select a language interface for the camera. When
a specific language is selected, the LCD screens on the back of the camera will
change to reflect the language selected.
To select a language:
To change Language: press a button until another language is
highlighted and then press the DO-IT button. The Language setting is maintained
until another is selected. This setting does not change when the camera is
turned off.
1 Set the Mode dial to Preferences.
2 Turn the camera on.
The LCD displays the Preferences screen.
3 Press a button until the Language
icon is highlighted on the third Preference
screen.
4 Press the DO-IT button.
The LCD displays the main Language screen.
The current setting is checked (
ü).
5 Press a button until the appropriate
language is highlighted.
6 Press the DO-IT button.
The main Preferences screen reappears.
/
/
/
Chap1newBook Page 12 Friday, February 5, 1999 7:02 AM