Kodak DC200 - Manual (Page 38)

4-8
Date and Time
The Date and Time screen is used to set the camera’s date and time.
To set the date and time:
To reset: the Date and Time setting is maintained until another setting is selected.
This setting does not change when the camera is turned off.
☞
If batteries are removed from the camera for more than a few minutes, the
Date/Time will be deleted and must be reset.
☞
If batteries are removed from the camera when the camera is on, the
Date/Time may be deleted and must be reset.
1 Set the Mode dial to Preferences.
2 Turn the camera on.
The LCD displays the Preferences screen.
3 Press a button until the Date/Time
icon is highlighted on the second
Preferences screen.
4 Press the DO-IT button.
The LCD displays the main Date/Time screen
with the current date and time listed.
5 Press a button to highlight the day,
month, year, hour, or minute setting.
6 Press a button to adjust the setting.
7 Repeat steps 5 and 6 until the information
is correct.
8 Press the DO-IT button.
The main Preferences screen reappears.
/
/
/
Chap1newBook Page 8 Friday, February 5, 1999 7:02 AM