Kodak DC200 - Manual (Page 37)

4-7
4
Preferences
Quickview
The Quickview screen is used to turn the camera’s Quickview setting on or off.
When you take a picture with Quickview on, the picture momentarily appears on
the LCD seconds after the picture is taken!
☞
The Quickview option must be activated to use the delete feature available
in Capture mode. See “Delete One Picture” on page 2-3 for more details.
To turn on Quickview:
To cancel Quickview: press a button until OFF is highlighted and then
press the DO-IT button. The Quickview setting is maintained until another
setting is selected. This setting does not change when the camera is turned off.
1 Set the Mode dial to Preferences.
2 Turn the camera on.
The LCD displays the Preferences screen.
3 Press a button until the Quickview
icon is highlighted on the second
Preferences screen.
4 Press the DO-IT button.
The LCD displays the main Quickview
screen.The current setting is checked (
ü).
5 Press a button until ON
is highlighted.
6 Press the DO-IT button.
The main Preferences screen reappears.
The next time you take a picture, it will
appear for a moment on the LCD screen.
/
/
/
Chap1newBook Page 7 Friday, February 5, 1999 7:02 AM