Kodak DC200 - Manual (Page 34)

4-4
Template
The Template screen is used to select a creative border and/or logo that is added
to your picture when the picture is captured. Once a picture is captured with the
template feature activated, the template cannot be removed. The memory card
supplied with your camera comes with some templates already pre-loaded.
☞
For more information on using templates with your DC200/DC210
camera, refer to the readme file on the DC200/DC210 software CD.
To select a template:
☞
The template is only visible after the picture has been taken with the
camera in either Review mode, or in Capture mode with Quickview
activated. See “Quickview” on page 4-7, or chapter 3 “Review” on page
3-1 for details.
To cancel Template: press a button until OFF is highlighted, and then
press the DO-IT button. The Template setting is maintained until another setting
is selected. This setting does not change when the camera is turned off.
1 Set the Mode dial to Preferences.
2 Turn the camera on.
The LCD displays the Preferences screen.
3 Press a button until the Template icon
is highlighted.
4 Press the DO-IT button.
The LCD displays the main Template screen.
The current setting is checked (
ü).
5 Press a button until the appropriate
option is highlighted.
6 Press the DO-IT button.
The main Preferences screen reappears.
/
/
/
Chap1newBook Page 4 Friday, February 5, 1999 7:02 AM