Kodak DC200 - Manual (Page 15)

2-5
2
Capture
Exposure Lock
Use the Exposure Lock to take a sequence of pictures that require the same
exposure. When this setting is activated, the camera maintains a constant
exposure setting.
To turn on Exposure Lock:
To Reset: The Exposure Lock setting automatically resets when the camera is
turned off.
1 Set the dial to Capture.
2 Turn the camera on.
3 Press the button two times.
The Exposure Compensation screen
appears, followed by the Exposure
Lock screen.
☞
Press the button a third time to
exit the exposure menu.
4 Press a button until ON
is highlighted.
5 Press the DO-IT button.
The Take a Picture screen appears.
6 Center the area you want to lock the
exposure on in the viewfinder
7 Press the SHUTTER button to lock in
the exposure setting.
/
Chap1newBook Page 5 Friday, February 5, 1999 7:02 AM