Kodak DC200 - Manual (Page 17)

2-7
2
Capture
Self-Timer
Activating the Self-Timer option creates a 10-second delay between the time you
press the SHUTTER button and when the picture is taken. This allows you to
include yourself in the picture.
To activate the Self-Timer:
To stop the Self-Timer: press the SELF-TIMER button again before the picture
is taken.
Memory Card
The DC200/DC210 comes equipped with a KODAK Picture Card (memory
card). The reusable memory card is used to store the pictures taken with the
camera. The camera does not have an internal memory and will not operate
without a memory card. The Card Status icon changes automatically to indicate if
there is a memory card inserted in the camera. You may not select or change this
icon.
1 Set the Mode dial to Capture.
2 Turn the camera on.
3 Press the SELF-TIMER
button.
The Self-Timer icon appears
on the Status Display.
4 Place the camera on a flat, steady surface or tripod.
5 Press the SHUTTER button.
The red Self-Timer light, located on the front of the camera, turns on and
stays lit for 8 seconds. The Self-Timer light flashes for 2 additional seconds
just before the picture is taken. The Self-Timer returns to the off setting once
the picture is taken.
No card inserted—pictures cannot be taken.
Card inserted—pictures are saved to the card’s memory.
Chap1newBook Page 7 Friday, February 5, 1999 7:02 AM