Kodak i100 Series - Manual (Page 62)

A-61517 October 2004
4-9
Image Processing
settings The other options on this dialog box allow you to define image
processing values that can be applied to your scanner.
Scan Source  the host computer provides information to the scanner
defining whether to scan one or both sides of the document. Simplex
indicates that only one side (front side) of the document will be scanned.
Simplex – Back indicates that only one side (back side) of the
document will be scanned. Duplex indicates that both sides of the
document will be scanned.
ADF  select this option when using the scanner in continuous feed
mode.
Dots per inch (dpi) or Resolution  indicates the scanning resolution,
which largely determines the quality of the scanned image. The greater
the resolution, the better the reproduction. However, scanning at a
higher resolution also increases scanning time and file size.
Choose a resolution value from the drop-down list. The default value is
200 dpi. Available resolutions are: 75, 100, 150, 200, 240, 300, 400, and
600.