Kodak i100 Series - Manual (Page 29)

A-61517 October 2004
3-6
The Imaging tab The Imaging tab allows you to define image processing values that can
be applied to your scanner.
Camera Selection box  lists the available sides (front and rear) of
any document where you can define individual image processing values.
You can select any individual camera (i.e., Front Color, Rear Color,
Front Bi-tonal and/or Rear Bi-tonal) or any combination of the
cameras. This means you can do simplex front, simplex rear, or duplex.
NOTE: Whatever is highlighted in the Camera Selection box
determines the values available on the Imaging, Paper,
Compression and Dropout tabs. In the screen below, all the
displayed values will be applied to the Front Bi-tonal image.