Kodak i100 Series - Manual (Page 51)

A-61517 October 2004
3-28
The Options tab The Options tab allows you to set Image Transfer and Transport control.
Image Transfer Order  if you are using simultaneous output scanning
(bi-tonal and color/grayscale) for either side, this option controls the
order in which the scanner returns image data. For example, if you are
scanning color and bi-tonal and you select Bi-tonal Image, the scanner
will return the bi-tonal front image, then the front color image.
Transport Timeout  allows you to set a transport timeout value. This
value is the amount of time the scanner will wait after the last document
enters the transport before the transport timeout action is taken. You can
specify a time delay setting from 3 to 30 seconds. The default is 8
seconds.
Energy Saving Control  allows you to set the amount of time the
scanner will remain inactive before the scanner goes into an idle state
(sleep mode). Choices are: (none) and 5 to 60 minutes. The default is 15
minutes.