Kodak i100 Series - Manual (Page 27)

A-61517 October 2004
3-4
Button Description
Opens the image viewer to display one image at a
time.
Opens the image viewer to display two images at a
time.
Opens the image viewer to display four images at a
time.
Opens the image viewer to display eight images at
a time.
Display Every  enter the sampling rate of the images you wish to
display while scanning. For example, to see every image, enter a value
of 1. To see every 10
th image, enter a value of 10.
Last File  displays the full path and file name for the last stored image.
Total  displays the total number of images scanned during the current
Scan Validation Tool session.
Kodak Scanner
Properties dialog
box The Kodak Scanner Properties dialog box consists of the following tabs.
Each tab will be described within this chapter.
Click on each tab to set all the desired values. You do not have to click
OK until you have made all selections on all of the tabs.
NOTE: For the purpose of this manual, all displayed dialog boxes
assume the features available on the Kodak i160 Scanner.