Installing options – Kenwood TM-D700 E User Manual

Page 91

Text mode
Original mode

INSTALLING THE VS-3 VOICE SYNTHESIZER UNIT

Always switch off the power and unplug the DC power cable first.

1 Remove the 6 screws from the lower cover of the

main unit.

2 Hold the VS-3 unit with the component side facing

upward, and insert the VS-3 connector into the
corresponding transceiver connector; the component
side must not face downward.

3 Replace the lower cover (6 screws).

INSTALLING THE PG-4X EXTENSION CABLE KIT

The PG-4X kit is available to extend the various
connection cables. For the cable connections, see the
next page. With two sets of PG-4X kits, you can extend
the cables to the maximum length.

The PG-4X kit also includes noise filters, modular plug
adapter cushions, and cable clamps. The following
diagrams illustrate how to install these accessories.

Component side

Approx. 3 cm

From front panel

From
microphone

Noise filter

INSTALLING OPTIONS