Operating basics – Kenwood TM-D700 E User Manual

Page 25

OPERATING BASICS

ADJUSTING VOLUME

Turn the VOL control clockwise to increase the audio
level and counterclockwise to decrease the audio level.

• If background noise is inaudible because of the Squelch

function, press the Mic PF key assigned the Monitor
function {page 62}, then adjust the VOL control. Press the
PF key again to cancel the Monitor function.

SELECTING A BAND

Press the left

[BAND SEL] to select band A, or the right

[BAND SEL] to select band B.

• “PTT” moves to the selected band.

• For band A and B, see page 17.

SWITCHING POWER ON/OFF

1 Switch ON the DC power supply.

•

If operating mobile, skip this step.

2 Press the PWR switch to switch ON the transceiver.

3 To switch OFF the transceiver, press the PWR switch

again.

4 If operating as a fixed station, switch OFF the DC

power supply.

•

You may skip step 3. After switching ON the transceiver,
you can switch it OFF or ON using only the power switch
on the DC power supply.