Kenwood TM-D700 E - Manual (Page 53)

47
9
VISUAL SCAN
While you are receiving, Visual Scan allows you to
monitor frequencies near the current operating
frequency. Visual Scan graphically and simultaneously
shows how all frequencies in the selected range are
busy. You will see up to 21 segments, for each channel,
that represent 7 S-meter levels (3 segments per level).
You will determine the scan range by selecting the
center frequency and the number of channels. The
default number of channels is 61.
■ Selecting the Number of Channels
1 Press [MNU] to enter Menu mode.
2 Press [ c c c c c ]/ [ d d d d d ] to select “RADIO (1–)”, then press
[OK].
3 Press [ c c c c c ]/ [ d d d d d ] to select “AUX (1–9–)”, then press
[OK].
4 Press [ c c c c c ]/ [ d d d d d ] to select “VISUAL SCAN (1–9–2)”,
then press [OK].
5 Press [ c c c c c ]/ [ d d d d d ] to select 31, 61 (default), 91, or
181.
6 Press [OK] to complete the setting.
7 Press [MNU] to exit Menu mode.
7
1
2
3
4
5
6
7
1
2
3
4
5
6
S-meter
level
Mode 1 (31 ch)
Cursor
Frequency channel
Move the cursor to this
position to receive this signal
Mode 2 (61 ch)