Function control – Kenwood KDC-BT742U User Manual
Page 8
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
Category Item
Setting
Entry
Setting overview
Condition Page
MENU
“ZONE2”
“REAR”*/
“FRONT”
Specifies the destination of AUX input sound when the
Dual Zone function is turned on.
*
“SUPREME”
**
“OFF”/ “ON”*
Turns ON/OFF the Supreme function.
*
“AMS CONTROL”
*
Controls the connected LX amplifier.
—
19
“CRSC”
“OFF”/ “ON”*
Switches to Monaural to decrease noise when reception
is poor.
8
“RECEIVE MODE”
“AUTO”*/
“DIGITAL”/
“ANALOG”
1 sec.
Sets the receive mode of HD Radio.
*
“TAG MEM”
“00”- “50”
Displays the tag memory usage of HD Radio. Up to 50
tags can be registered to this unit.
34
“TAGGING”
“0FF”/ “ON”*
Turns ON / OFF the tag memory function of HD Radio.
34
“ESN=”
Displays the Electronic Serial Number of satellite radio.
—
“NAME SET”
1 sec.
Sets the display when switched to AUX source.
11
“SCROLL”
“AUTO”*/
“MANUAL”
Specifies whether the text is scrolled automatically.
—
4
“FAV DELETE”
1 sec.
Deletes Favorite Preset Memory.
26
“AUX”
“OFF”/
“ON1”*/
“ON2”
Sets whether to display AUX during source selection.
*
“CD READ”
“1”*/ “2”
Sets the CD read mode.
*
“AUDIO PRESET”
*
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
22
“DEMO MODE”
“OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—
19
: Can be set for sources other than the standby
source by setting “2 ZONE” of
: Can be set while a cell-phone is connected.
: Refer to the reference page.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
*Factory setting
* Function of KDC-BT742U.
* Function of KDC-X493.
* Function of KDC-MP442U.
* iPod play mode cannot be set when
“OFF”.
* Refer to