Kenwood KDC-BT742U - Manual (Page 37)

English |
37
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version Bluetooth Standard Ver. 2.0
Profile HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
For the cell-phones verified for compatibility, access
the following URL:
http://www.kenwood.com/bt/information/
⁄
• The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
• HFP is a profile used to make a hands-free call.
• OPP is a profile used to transfer data such as a phone book
between units.
For operating KCA-BT200 (Optional)
For operation refer to Model-B-2 in the Instruction
Manual of KCA-BT200, and the table below.
Notation used in the KCA-BT200
Instruction Manual Operation
[ 38] button [AUD] knob
Control knob [AUD] knob
Press the [AUTO]/[TI] button Press the [ 38] button for at
least 1 second.
Control knob knob towards up or down [AUD] knob knob towards up
or down
Control knob knob towards left or right [AUD] knob knob towards left
or right
For operating KCA-BT100 (Optional)
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
1. Press the [AUD] knob. Select the “NUMBER DIAL”
display.
2. Press the [SEARCH] button.
3. Select the number to recall by turning the [AUD]
knob.
4. Press the [AUD] knob.
1. Operation is the same. Refer to the instruction
manual of KCA-BT100.
2. Press the [SEARCH] button.
3. Select the number to memory by turning the
[AUD] knob.
4. Press the [AUD] knob for at least 2 seconds.
1–3. Operation is the same. Refer to the instruction
manual of KCA-BT100.
4. Press the [AUD] knob at least 1 second.
5. Press the [SEARCH] button.
Control> in this instruction manual.
About display
Cell-Phone Status is displayed in the status display of
this unit.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual Actual displays on this unit
“DISCONCT” “HF DISCONCT”
“CONNECT” “HF CONNECT”
“PHN-DEL” “DEVICE DEL”
“P-STATUS” “DVC STATUS”
“BT-CON Y” “HF CONNECT Y”
“BT-CON N” “HF CONNECT N”
B64-4314-00_00.indb 37 08.11.1 2:43:49 PM