Bluetooth setup – Kenwood KDC-BT742U User Manual
Page 28
28
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Bluetooth Setup
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
When registering from Bluetooth devices
1
Turn on the control unit.
2
Start registering a unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
CD/R-3P2” from the list of connected units.
3
Enter a PIN code
Input the PIN code registered as mentioned in
Bluetooth device.
4
By operating the Bluetooth device, start hands-
free connection.
When registering from this unit
1
Enter Bluetooth device registration mode
Select “MENU”
>
“DVC REGIST”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
Search for the Bluetooth device.
When search is completed, “FINISHED” is displayed.
2
Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down to select the Bluetooth device.
Press the [AUD] knob to determine the
selection.
3
Input the PIN code
Operation type
Operation
Select the numbers.
Turn the [AUD] knob or push it towards
up or down.
Move to the next digit.
Push the [AUD] knob towards right.
Delete the last digit.
Push the [AUD] knob towards left.
4
Transmit the PIN code
Press the [AUD] knob for at least 1 second.
If “PAIRING OK” is displayed, registration is
completed.
5
Return to the device list
Press the [AUD] knob.
6
Exit Bluetooth device registration mode
Press the [SEARCH] button.
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
• If the error message appears even though the PIN code
is correct, try
(page 28).
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1
Enter special device registration mode
Select “MENU”
>
“S-DVC SELECT”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
A list is displayed.
2
Select a device name
Turn the [AUD] knob or push it towards up or
down to select a device name.
Press the [AUD] knob to determine the
selection.
If “COMPLETE” is displayed, registration is
completed.
3
Go through the procedure of
Bluetooth device> (page 28) and complete the
registration (pairing).
Cancelling special device registration mode
Press the [SEARCH] button.
⁄
• If the device name is not in the list, select “OTHER
PHONE”.
Function of KDC-BT742U
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1
Enter PIN code edit mode
Select “MENU”
>
“PIN EDIT”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
The current setting of PIN code is displayed.
B64-4314-00_00.indb 28
08.11.1 2:43:47 PM