Audio adjustments – Kenwood KDC-BT742U User Manual
Page 20
20
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Audio Adjustments
Audio Control
You can adjust following Audio Control items ;
Adjustment Item Display
Range
Rear volume
“R-VOLUME”
0 — 35
Subwoofer level
“SUB-W L”
–15 — +15
Bass Boost*
“B.BOOST”
“STEP1”/”STEP2”/“OFF”
(The indicator turns on
according to the setting.)
System Q*
“NATURAL”/“USER”/
“ROCK”/“POPS”/“EA
SY”/“TOP40”/“JAZZ”
/”GAME”
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz/
Game
Bass level*
“BASS L”
–8 — +8
Middle level*
“MID L”
–8 — +8
Treble level*
“TRE L”
–8 — +8
Balance
“BALANCE”
Left 15 — Right 15
Fader
“FADER”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
* Function of KDC-X493/MP442U.
⁄
• Source tone memory: You can set Bass, Middle, and
Treble for each source.
• “USER”: The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [
0]
button.
Function of KDC-X493
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leval.
Bass level
Adjustment Item
Display
Range
Bass Center Frequency
“BASS F”
40/50/60/70/80/100/
120/150 Hz
Bass Q Factor
“BASS Q”
1.00/1.25/1.50/2.00
Bass Extend
“BASS EXT”
OFF/ON
Middle level
Adjustment Item
Display
Range
Middle Center Frequency “MID F”
0.5/1.0/1.5/2.0 kHz
Middle Q Factor
“MID Q”
1.0/2.0
Treble level
Adjustment Item
Display
Range
Treble Center Frequency “TRE F”
10.0/12.5/15.0/17.5 kHz
1
Select the Basic Audio item
For how to select Basic Audio items, see
2
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [AUD] knob.
4
Adjust the Detail Audio item
Turn the [AUD] knob.
5
Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
⁄
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob or
[
0]
button.
B64-4314-00_00.indb 20
08.11.1 2:43:46 PM