Kenwood MD-2070 - Manual (Page 37)

DMF-9020/MD-2070 (En)
37
Editing
÷ It takes a while until the execution completes.
÷ The track is divided into two tracks.
÷ The unit enters pause mode at the second track.
÷ There is no blank space left between the two tracks.
÷ Track division may sometimes be impossible due to the limitations of
the MD standard.
÷ If you execute an editing operation by mistake, the condition before
editing can be recovered by performing the “EDIT CANCEL” opera-
tion.
‹
Execute the track divide operation.
Eject the Mini Disc.
Divided track (second half)
Divided track (first half)
Should be approx.
2 sec. or longer.
Image of track division Image of preview
Display after execution.
“EDIT NOW!” : When editing is in progress
“COMPLETE!” : When editing is completed successfully
“CAN’T EDIT” : When editing is incomplete
While “WRITING” is displayed, do not apply shock
or vibration to the unit because information is
being written on the Mini Disc.
Up to 255 track numbers can be inserted additionally
by repeating
1 to 3 for each of them.
Approx. 2 sec.
Fine adjustment range in 32 steps
The point where the EDIT / SPACE key is pressed
N O D I S C WRITING EJECT
A B C
1 2 3
A B C
1 2 4 3 A B
1 2
C
3
Note Note Note
3
4
Mini Disc has been ejected. Information is
being written.
ENTER
/TIME DISPLAY
0