Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual
Page 52
Chapter 5
Network interfaces
52
Adding new interface (Software Appliance / VMware Virtual Appliance)
In the Software Appliance / VMware Virtual Appliance edition, WinRoute allows to add new
network interfaces (dial-up, PPPoE and PPTP connections) right in the administration console.
Click on Add to open a menu and select type of the new interface (dial-up can be added only
if an analog or ISDN modem is installed on the firewall host).
The new interface needs an easily identifiable name that will be showed in WinRoute and it
needs to be added to a group of interfaces (this item can be changed as desired any time
later).
Other parameters of the interface depend on the selected interface type. Most types require
username and password for access verification.
Optionally, you can specify IP address of a specific DNS server which will then be used as the
primary DNS server for Internet connections via this interface.
The Dialing settings can be used to set time intervals in which the connection should be estab-
lished persistently and when it should be disconnected. Out of these intervals, the connection
will be established on demand (i.e. it will be established automatically any time WinRoute
needs to send a
to the corresponding network). For details about on-demand dialing,
see chapters
and
.