Kerio Tech KERIO WINROUTE FIREWALL 6 - Manual (Page 50)

Chapter 5 Network interfaces
50
DNS
IP address of the primary DNS server set on the interface.
MAC
Hardware (MAC) address of a corresponding network adapter. This entry is empty for
dial-ups as its use would be meaningless there.
Use the buttons at the bottom of the interface list to remove or edit properties of the chosen
interface. If no interface is chosen or the selected interface does not support a certain function,
appropriate buttons will be inactive.
Add VPN Tunnel
Use this option to create a new server-to-server VPN tunnel. Details on the proprietary
Kerio VPN solution are provided in chapter 23 .
Note: In Software Appliance / VMware Virtual Appliance, it is also possible to add new
interfaces (dial-up, PPTP or PPPoE connections) — see section Adding new interface. If
WinRoute is installed on Windows, it is necessary to define new connections by standard
methods right in the operating system.
Modify
Click on Edit to view and/or modify parameters of the selected interface.
Figure 5.2 Editing interfaces