Kodak 5.1 - Manual (Page 85)

www.kodak.com/go/aiosupport 79
KODAK HERO 5.1 All-in-One Printer
Scanning to network folder
You can scan your original and immediately send the scanned file to a network folder
directly from the printer.
NOTE: You must first use the Online Printer Management Tool to set up scanning to
network folder options (see Setting up Scan To Network Folder, page 25 ).
1. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
2. Press to select Scan, then press OK .
3. Press to select Scan to Network Folder, then press OK.
4. Select Sharing folder, then press OK.
5. If necessary, enter the 4-digit PIN number (see page 27 ), select Done , then
press OK .
6. Press Start.