Manual two-sided printing – Kodak 5.1 User Manual
Page 48
Printing
42
www.kodak.com/go/aiosupport
6. Under “Flip on:”, select
Long edge
or
Short edge
, then click
OK
.
7. Click
OK
to start the print request.
Automatic two-sided printing from a computer with MAC OS
To print two-sided documents from a computer with MAC OS using the duplexer:
1. Load plain paper into the paper input tray.
2. Open the document you want to print, then select
File > Print
.
3. In the Print dialog box, make sure that
Eastman Kodak Company HERO 5.1 AiO
is
selected (printers with a wireless connection have a 4-digit number added to
the end of the name).
4. In the
Copies & Pages
drop-down list, select
Layout
.
5. In the
Two-Sided
drop-down list, select either
Long-Edge binding
or
Short-Edge
binding
.
6. Click
.
Manual two-sided printing
You can print two-sided documents on any size paper that the printer accepts (see
) when you rotate the paper manually.
IMPORTANT:
Two-sided printing can only be done on media that can absorb ink on both
sides, such as plain paper or two-sided photo paper. Do not print two-sided
on bar-coded photo paper (the bar code is on the back side).
Manual two-sided printing from a computer with WINDOWS OS
To print two-sided documents from a computer with WINDOWS OS:
1. Load paper into the paper input tray.
2. Open the document you want to print, then select
File > Print
.
3. In the Print dialog box, make sure that
KODAK HERO 5.1 AiO
is selected
(printers with a wireless connection have a 4-digit number added to the end of
the name), then click
Properties
.
4. Select the
Layout
tab.
5. In the Two-sided printing field, select
Manual
, then click
OK
.
NOTE: You can also select manual two-sided printing from the
General
tab under
the
Job settings
field.
6. Under “Flip on:”, select
Long edge
or
Short edge
, then click
OK
.
7. Click
OK
to start the print request.
8. When a message appears on your computer and control panel, remove the
printed pages from the paper output tray, then follow the instructions on the
control panel.
9. Press
Start
on the control panel.