Using default settings to print a picture – Kodak 5.1 User Manual
Page 52
Printing
46
www.kodak.com/go/aiosupport
Using default settings to print a picture
1. Load photo paper with the logo side facing up (see
), and move the left paper-edge guide until it touches the paper.
2. Insert the memory card into the memory card slot, or connect the digital camera
or portable drive to the front USB port, then press
to select
View Photos
, then
press
OK
.
IMPORTANT:
Use only one slot or port at a time.
3. Press
or
to select the picture you want to print.
4. Press
Start to begin printing.
The printer prints one 4 x 6 in. / 10 x 15 cm picture.
IMPORTANT:
To prevent loss of data from your memory card, do not remove it from the
printer while printing.
left paper-edge guide
This manual is related to the following products: