Moving to another folder, Moving to another file, Slide show interval time – Kenwood KDV-3241Y User Manual
Page 27: Repeat, Viewing still picture, Zoom, Rotating the picture
English
|
27
Moving to another folder
1
Press [
5]/[∞] to select the previous or next
folder in the disc.
Moving to another file
1
Press [
2]/[3] to select the previous or next file
in the selected folder.
Slide show interval time
1
Press [DISC MENU] ([DISC MENU/SETUP] or
STOP [
7] on the remote control) to return to
the menu screen.
2
Press [
1]/[¡] on the remote control to
select the option you want to use.
It shows the slide show interval time:
FAST—OFF—SLOW—NORMAL
(FAST: 3 sec, NORMAL: 8 sec, SLOW: 13 sec)
Repeat
1
Press [REP] ([REPEAT] on the remote control )
to select the option you want to use.
There are 2 repeat mode: ALL or FOLDER.
• ALL: Plays repeatedly on the disc.
• FOLDER: Plays repeatedly on the current folder.
Viewing still picture
1
Press [
38] ([8] on the remote control) during
the slide show.
The player will now go into the pause mode.
• If the slide show interval time is OFF, you cannot
perform this function.
2
To return to the slide show, press [
38] again
(PLAY [
3] on the remote control).
Zoom
1
While viewing images, press [ZOOM] to
enlarge the image (100%—400%—1600%).
• You can move through the zoomed picture using
[
5]/[∞]/[2]/[3].
• To cancel the zoom mode, press PLAY [
3] on the
remote control.
⁄
• The zoom function may not work when the size of the
file is too small.
Rotating the picture
1
During watching pictures, press [
5]/[∞]
during showing a picture to rotate the picture
clockwise or counter clockwise.