Kenwood KDV-3241Y - Manual (Page 11)

English | 11
Using the EQ (Equalizer)
1 Press [EQ/LOUD] repeatedly.
The indicator lights in the following order.
POP—CLASSIC—ROCK—JAZZ—VOCAL—
SALSA—SAMBA—USER1—USER2— off (no
display)
• POP: Optimized for R&B, Soul and Country music.
• CLASSIC: Optimized for orchestral music.
• ROCK: Optimized for Hard Rock and Heavy Metal
music.
• JAZZ: Sweet sound with soft feeling.
• VOCAL: Powerful realism with strong sound quality.
• SALSA: Reproduces salsa music acoustics.
• SAMBA: Reproduces samba music acoustics.
• USER1: Use the menu to set the sound level you
want.
• USER2: Use the menu to set the sound level you
want.
⁄
• You can adjust each sound level to your preference.
Once you select a USER mode and then make an
adjustment, it automatically stored for the currently
selected USER mode. Refer to Adjusting the sound level
(page11).
Mute
1 Press [MUTE] to cut the sound.
2 To cancel it, press [MUTE] again.
Checking the clock
1 You can see the clock pressing [DISP] on the
control panel.
⁄
• If the RDS broadcasting with CT (Clock Time)
information’s received by the unit, the clock will be
updated automatically in the display. Unless, “NO CLOCK”
appears in the display
Loudness
1 Press and hold [EQ/LOUD] to reinforce treble,
bass and surround effect.
Loudness off (no display)—loudness on (“LOUD”
indicator lights)
Adjusting the sound level
1 Press [AUDIO/MENU] repeatedly to select the
mode you want to adjust from volume, bass,
middle, treble, balance and fader.
The indicator lights in the following order.
VOL — BAS— MID — TRB— BAL— FAD
2 Rotate [VOL] (Press [VOL +/–] on the remote
control) to adjust the sound quality.
Indication Turn right Turn left
“VOL” Increase the volume level. Decrease the volume level.
“BAS” Increase the bass level. Decrease the bass level.
“MID” Increase the middle level. Decrease the middle level.
“TRB” Increase the treble level. Decrease the treble level.
“BAL” Decrease the level of the
left speaker(s). Decrease the level of the right
speaker(s).
“FAD” Decrease the level of the
front speaker(s). Decrease the level of the rear
speaker(s).
⁄
• When EQ or LOUD is set to Off, you can adjustthe sound
level (BAS, MID, TRB) settings.