Kenwood KDV-3241Y - Manual (Page 10)

10 | KDV-3241Y
Basic Operation
Turning the unit on
1 Press any button ([PWR] on the remote
control) other than eject [ 0 ] and release.
Ejecting a disc
1 Press [ 0]. The disc automatically ejects from
the loading slot.
⁄
• When the disc is ejected by pressing [ 0] during
playback, it will be loaded automatically after 10 seconds
unless you remove the disc from the unit.
Turning the unit off
1 Press and hold the [OFF] ([PWR] on the remote
control).
Inserting a disc
1 Draws the disc, and starts playback
automatically.
⁄
• The DVD player plays one, standard 12-cm disc at a time.
Playing back an 8-cm disc is not possible with this unit
and can not use adapter.
• Do not insert anything other than a disc into the disc
loading slot. Discs which can be played back are listed
on Types of Playable Discs (page 7).
Selecting a source
1 Press [SRC] to select a source.
Press [SRC] repeatedly to switch between the
following sources:
Tuner—CD/DVD—AUX (AUX IN)
Selecting a media type
When you select CD/DVD as a source, you can
switch the MUSIC, PHOTO and MOVIE menu on a
disc with audio, photo, and movie files.
Each menu has a media type indication tab which
shows what media you are selecting.
1 Press [BAND] ([BAND] on the remote control)
to select other media types.
Media type indication tab
⁄
• For a disc with only audio files, “MUSIC” is displayed. If the
disc has photo or movie files, “PHOTO” tab or “MOVIE” tab
is displayed.
Adjusting the volume
1 Rotate [VOL] (Press [VOL +/–] on the remote
control) to adjust the sound level.
⁄
• When you turn the unit off, the current volume level is
automatically memorized. Whenever you turn the unit
on again, it will operate at the memorized volume level.