Kenwood KDV-3241Y - Manual (Page 24)

24 | KDV-3241Y
DVD/VCD Operation
Repeat
DVD - Chapter/Title/Off. The default settings
is Off.
1 To repeat the chapter currently playing, press
[REP] ([REPEAT] on the remote control).
The Chapter icon appears on the TV screen.
2 To repeat the title currently playing, press
[REP] ([REPEAT] on the remote control) again.
The Title icon appears on the TV screen.
3 To exit the repeat mode, press [REP] ([REPEAT]
on the remote control) again.
The Off icon appears on the TV screen.
Skip to previous chapter/track
1 Press briefly [ 2] ([4] on the remote control)
and press again within 4 seconds of playing
time.
Return to the beginning of the
current chapter/track
1 Press briefly [ 2] ([4] on the remote control)
after 4 seconds of playing time.
Scan
1 Press [ 1]/[¡] on the remote control during
playback.
2 Press [ 1]/[¡] repeatedly on the remote
control to select the required speed:
1Ч2, 1Ч4, 1Ч8, 1Ч16, 1Ч32, 1Ч100
(backward) or
¡Ч2, ¡Ч4, ¡ Ч8, ¡Ч16,
¡Ч32, ¡Ч100 (forward)
With a Video CD, the scan speed changes: 1Ч2,
1Ч4, 1Ч8, (backward) or ¡Ч2, ¡Ч4,
¡Ч8, (forward).
3 To return to normal playback, press [ 3/8]
(PLAY [ 3] on the remote control).
Time search
The Time Search function allows you to start playing
at any chosen time on the disc.
1 Press [DISPLAY] on the remote control during
playback.
The on-screen display appears on the screen. The
Time Search box shows the elapsed playing time of
the current disc.
2 Within 10 seconds, press [ 5]/[∞] to select the
Time Search icon in the on-screen display.
The “ – : – –: – –” appears in the Time Search box.
3 Within 10 seconds, use the number buttons to
enter the required start time.
Enter hours, minutes, and seconds from left to right
in the box.
4 Within 10 seconds, press [ENTER] to confirm
the start time.
Playback starts from the selected time on the disc.
• If you enter an invalid time, playback will continue
from the current point.
⁄
• On a Video CD with PBC, you must set PBC to Off on the
setup menu (page 21).
VCD - Track/All The default settings is All.
1 To repeat the track currently playing, press
[REP] ([REPEAT] on the remote control).
The Track icon appears on the TV screen.
2 To exit the repeat mode, press [REP] ([REPEAT]
on the remote control) again.
The All icon appears on the TV screen.
⁄
• On a Video CD with PBC, you must set PBC to Off on the
setup menu (page 21).