Kenwood HM-353V - Manual (Page 24)

24
Playback of tape
Basic section
Receiving broadcast station
1
Receive a broadcast.
2
Select "AUTO PRESET".
Collective presetting of stations (Auto preset)
Main unit only
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use "One-by-one pre-
setting (Manual preset)".
Channel space setting
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
1
Turn power on.
2
While holding TUNER FM/AM key pressed,
turn the volume/multi control knob to se-
lect "FM 50 kHz" or "FM 100 kHz".
3 Set it.
Each press switches the space frequency alter-
nately.
1 "FM 50 kHz" (FM 50 kHz, AM 9 kHz)
2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz)
FM/AM
TUNER
volume / multi control
\ \ \ \
menu set / demo
A U T O P R E S E T
FM/AM
TUNER
set / demo
volume / multi control
Main unit only