Kenwood FM/AM Reciever R-SE7 - Manual (Page 9)

R-SE7/DP-SE7/X-SE7 (En)
9
Preparation section
Basic
section
Application section
Knowledge
sections
System connection
SYSTEM
CONTROL ANTENNA
AM
GND
FM75
CD
IN IN REC PLAY
SUPER
WOOFER
PRE OUT SPEAKERS
( 6 - 16 )
L R
TAPE
REC PLAY
MD AUX
R
L
ANTENNA
AM
GND
FM75
ANTENNA
AM
GND
FM75
System connection
Connect the antenna as shown in the figure.
Do not plug the power cord into a wall AC outlet until the connection has been completed.
1. Antenna connection
1 2 3
Connection of the Accessory Antenna
FM indoor antenna
The accessory antenna is for temporary indoor use only.
For stable signal reception we recommend using an out-
door antenna. Remove the indoor antenna if you connect
one outdoors.
1 Strip the coating from the tip of
cord and twist the conductor.
2 Locate the position providing good
reception condition.
3 Fix the antenna.
AM loop antenna
The supplied antenna is for indoor use. Place it as far as
possible from the main system, TV set, speaker cords and
power cord, and set it to a direction which provides the
best reception.
FM outdoor antenna
Lead the 75
Ω
coaxial cable connected to the FM outdoor
antenna into the room and connect it to the FM 75
Ω
termimal.
Antenna adapter
(commercially
available)
FM outdoor
antenna
(commercially
available)
AM loop
antenna
FM indoor
antenna
In case of bad reception
R-SE7