Kenwood FM/AM Reciever R-SE7 - Manual (Page 28)

R-SE7/DP-SE7/X-SE7 (En)
28
Preparation section
Basic section
Application section
Knowledge sections
Recording
1. Load a tape in deck.
2. Select the tape transport direction.
3. Set the recording condition.
1 Open the tray of the cassette deck.
2 Insert a tape.
3 Close the tray.
Recording
Recording
÷ When recording is started, the tape is transported in the
direction selected in this step.
÷ Wind the tape to the position where recording is to be
started.
÷ Differentiation between normal (TYPE I) and high
(TYPE II) tape is set automatically.
÷ Remove tape slack before loading.
1 Press the playback key for the direction to be played (lights green).
2 Stop playback (lights red).
1 Select the reverse mode. £
2 Select the DOLBY NR mode. £
Check the tape transport direction
indicator.
Note that this cassette deck cannot record onto Metal
tapes.
Note Note
Top side
Reverse
side
To reverse the transport direction
5 5
4 4
2 2
3 3
1 1
3 3
0
1 1
3 2
rev. mode
3 3
Dolby NR
3 3