Timer operation, Operate easy to use timer (o.t.t.), Sleep timer – Kenwood FM/AM Reciever R-SE7 User Manual
Page 45: A m 7 ) ), Adjust the clock before setting the timer
R-SE7/DP-SE7/X-SE7 (En)
45
Preparation section
Basic
section
Application section
Knowledge
sections
Timer operation
Timer operation
Adjust the clock before setting the timer.
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the power is switched off after one
hour. This timer operates only once directly after setting.
Sleep timer
The power is turned OFF automatically after the specified period has elapsed.
Timer playback, timer recording
Playback of the selected source (or broadcast recording) will be executed for the set time.
AI timer playback
When timer playback starts, the volume increases gradually.
Operate easy To use Timer (O.T.T.)
Timer playback is possible simply by setting the time.
The source selected last before the power was switched
off will be played. One hour after start of timer play-
back, the power will be switched off automatically.
1 Select the source to be played and set the
volume.
2 Switch OFF the power supply.
3 Press the “tuning (fi)” key.
4 Set the ON time.
5 Press the “enter” key.
The program timer does not operate during
playback by the O.T.T. timer.
÷ When the “tuning (fi)” key is pressed, the input source
will be displayed, and after a few seconds, the ON time
will be displayed.
÷ The ON time can be set in steps of 5 minutes.
÷ In case of combination with another timer, the input
source which operated last will be played.
Press the “tuning (
fi)” key twice while the
power is OFF.
To cancel
Blinks
ON time display
Adjust the clock before setting the timer.
R-SE7
Adjust the clock before setting the timer.
Sleep timer
Set the number of minutes after which the power
is to be turned OFF.
1 Turn the power ON.
2 Set the time.
Turn the power OFF or press the SLEEP key until
the sleep time is cancelled.
To cancel
÷ The power is turned OFF automatically after the set time
has elapsed.
÷ Each press decreases the time by 10 minutes. The
maximum time that can be set is 90 minutes.
90
=80=70...30=20=10=Cancel=90=80...
Duration for sleep timer
Lights
R-SE7
A M 7 ) )
:
O.T.T.
SLEEP
9 )
tuning
volume
control
pure
A
∞
∞
down
up
SLEEP
To decrease
the figure
To increase
the figure
enter